FREE CALL  1800 234 477     

15H - High Pressure Service Gauge

15H Small Dial High Pressure Safety Service Gauge Budenberg Australia

Small Dial Safety Service Gauge - High Pressure

The Budenberg model 15H pressure gauges has been manufactured to meet the demand for small high quality gauges designed for applications using gases, water or any liquid that does not attack brass and bronze or Stainless Steel.

The one piece polycarbonate case with integral window forms a solid baffle in front of the Bourdon tube and incorporates a full diameter stainless steel blow-out back so that in the event of a tube failure through corrosion, explosion or gross over pressure any vapour or debris is vented from the back of the case.

This Budenberb gauge has been designed for direct mounting on to the process pipe work and comes with a grey inner sleeve to give a grey colour to the side of the case.

For oxygen applications these gauges must be manufactured to ensure they are entirely free from oil and grease.

 

    contact us   for pricing and availability of the Budenberg 15H Pressure Gauge.

 

 

The Budenberg 15H Pressure Gauge is suitable for the following applications / industries

 

Waste Water Pressure Gauges

Water & Waste Water
Pressure Gauge

Power Generation Pressure Gauges

Power Generation
Pressure Gauge

 

Budenberg 15H Specifications

Size 63mm (2.5") & 80mm (3.15"
Mounting Direct
Case & Bezel One piece Polycarbonate, SAfety Pattern case
Scale Ranges
Above 60 bar up to 700 bar
Equivalent units of pressure /vacuumm available, single & dual scales are available.
Pressure Element 316 Stainless Steel helical coil brazed to the body and with welded end piece
Overload Protection Up to 115%
Pressure Connection
1/4" BSP as standard
1/8", 1/4" & 3/8" BSP & NPT as are available
Accuracy
CL:1 1.0% of FSD as defined in EN837-1
Temperature
Operating: -20 to +90°c
Storage: -40 to +100°c
Options for lower or higher operating temperatures, please contact our office
Temperature Effect Variation in indication caused by temperature shall not exceed +0.04 x (t2 - t1)% of the span where: t1 is the reference ambient temperature in degrees celsius / t2 is the ambient temperature in degrees celsius
Environmental IP54 as defined in EN 60 529
Certification
Individually calibrated with a unique serial number printed on the dial.
Certificate of Conformity.
Available Certification: BS EN 10204 3.1B Material Certification Point to Point Test Certification
Traceability All instruments are individually calibrated and have a unique Serial Number printed on the dial.
Safety All units are manufactured to comply with EN837-1, S3 Specification and other regulatory standards including PED.

 

 

Classic 15H Series Dial Specifications

Size 63mm (2.5") & 80mm (3.15")
Dial
White Anodised Aluminium marked in black finish
Option: Dual Scale, colour bands & sectors
Customisation with Company Name & Logo also available
Pointer
Stainless Steel coloured Black
Movement
Brass Construction
Options: Viscous Damped movement to overcome the effects of minor pressure pulsations and vibrations
Window
1 piece polycarbonate


15H Pressure Gauge Specification Sheet Download

To view all the information on the Budenberg 15H Pressure Gauge you can download the data sheet here 

DOWNLOAD PDF

 

Line Marking Equipment Quote Request

Tell what you are interested in or your application and we will help with the best option for your needs.

  

Please select the required application and equipment interests

We can also have your line marker repaired. Call us today to organise your line marker repair.

Privacy Policy - your details are private and will not be sold/given to a third party.

Portable Gas Detector Warranty Registration

Warranty Registration - Gas Detection

Warranty Registration - Portable Gas Detector

Register your Portable Gas Detection

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Warranty Registration - Sentech Refrigerant Monitor

To validate the Warranty on your Sentech Refrigerant Monitor please complete this form and submit to return it to Aegis Sales & Service / Techinspect within 30 days of installation.

Please provide the relevant system information: Installation Address, Company Name and/or Building Name, Sentech Model and Serial Number.

  
  

Please provide required information on the installation of the system.

  
  

I hereby certify that the above SenTech equipment has been installed and inspected in accordance with the installation and operation manual and is in satisfactory operating condition.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Book Your Loner Demo

Book your Lone Worker Device Demonstration

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Simply complete this form and one our qualified staff will contact you or phone the office on 1800 234 477.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Contact Us - Roof Safety Systems

Simply complete this form and one our qualified staff will contact you or phone the office on 1800 234 477.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Contact Us - Roof Safety Systems - Latchways

Please complete the details below and one of our Roof Safety Professionals will be in contact to discuss your system needs.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Simply complete this form and one our qualified staff will contact you or phone the office on 1800 234 477.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Request Your G7 Portable Gas Detector & Lone Worker Monitor Demo

  
Privacy Policy - your details are private and will not be sold/given to a third party.

6 Drawer Tool Box With BBS
7 Drawer Roll Cabinet With BBS
Vacuum Formed Insert Tray With Tools
45 Piece 1/4" & 3/8" Drive Socket Set
43 Piece 1/2" Drive Metric & AF Socket Set
Vacuum Formed Insert Tray With Tools
7 Piece Punch & Chisel Set
Vacuum Formed Insert Tray With Tools
54 Piece 10mm Shank Bit Set
Vacuum Formed Insert Tray With Tools
200mm Combination Pliers
200mm Long Nose Pliers
180mm Diagonal Cutting Pliers
Vacuum Formed Insert Tray With Tools
24 Piece Metric & AF Combination Spanner Set
Vacuum Formed Insert Tray With Tools
175mm Auto Loading Utility Knife
7 Piece Blade & Phillips Screwdriver Set
250mm Curved Jaw Multigrip Pliers
250mm Locking Pliers
450g (16oz) Ball Pein Hammer
250mm Adjustable Wrench
150mm Adjustable Wrench
30 Piece Hex Key Set
300mm Hacksaw

Privacy Policy - your details are private and will not be sold/given to a third party.
  

Please select the most appropriate time and contact method for one of our team to contact your regarding your query.

Privacy Policy - your details are private and will not be sold/given to a third party.
Privacy Policy - your details are private and will not be sold/given to a third party.