Small Dial 80mm - Stainless Steel Case - OEM Pressure Gauge
The Budenberg model 17 series of pressure gauges have been manufactured to meet the demand for small high quality gauges designed for muliple applications except gases, (over 25 bar) to include water or any liquid that does not attack copper and bronze.
The instruments are available in 80mm dial size with either direct or surface mounting options. They are suitable for solvent laden or chemical laden atmospheres that could damage a polycarbonate case.
The case is polished stainless steel and the front window is retained by a ring of white Hytrel polyester. The window can be either glass or perspex depending on the application.
These instruments are produced to look exceptionally clean and bright in appearance and can be used in areas where appearance is a critical factor for aesthetics.
contact us for pricing and availability of the Budenberg 17 Series Stainless Steel Pressure Gauge.
The Budenberg 17 Series of Pressure Gauges are suitable for the following applications / industries
Water & Waste Water
Budenberg 17 Series Specifications
|Mounting||Direct bottom & bottom-back or surface|
|Case & Bezel||Stainless Steel polished case with Hytrel Polyester retiner (bezel)|
|Scale Ranges||Up to 600 psi - Phospher Bronze Tube - Model 17P
Up to 4,000 psi - Beryllium Copper Tube - Model 17B
Up to 10,000 psi - High Pressure Stainless Steel Coil Tube - Model 17H
|Pressure Element||Dependent on range|
|Overload Protection||Units will withstand up to 125% of FSD
1/4" BSP as standard (NPT also available)
1/8" & 3/8" BSP & NPT as are available
Also available with diaphragm seal assembly
CL:1 1.0% of FSD as defined in EN837-1
Operating: -20 to +90°c
Storage: -40 to +100°c
Options for lower or higher operating temperatures, please contact our office
|Temperature Effect||Variation in indication caused by temperature shall not exceed +0.04 x (t2 - t1)% of the span where: t1 is the reference ambient temperature in degrees celsius / t2 is the ambient temperature in degrees celsius|
|Environmental||IP54 as defined in EN 60 529|
Individually calibrated with a unique serial number printed on the dial.
Certificate of Conformity.
Available Certification: BS EN 10204 3.1 Material Certification Point to Point Test Certification
|Traceability||All instruments are individually calibrated and have a unique Serial Number printed on the dial.|
|Safety||All units are manufactured to comply with EN837-1, O specification and other regulatory standards including PED. Blow-out vent design = S2 safety specification.|
Classic 15L Series Dial Specifications
White Anodised Aluminium marked in black finish
Option: Dual Scale, colour bands & sectors
Customisation with Company Name & Logo also available
Aluminium coloured Black
Options: Viscous Damped movement to overcome the effects of minor pressure pulsations and vibrations
1 piece polycarbonate
17 Series Pressure Gauge Specification Sheet Download
To view all the information on the Budenberg 17 Series Pressure Gauges you can download the data sheet here