GasAlert MicroClip XL Portable Multi Gas Detector

GasAlertMicroClip XL Multi Gas Detector from Honeywell BW The GasAlert MicroClip XL part of the Honeywell BW™ MicroClip range is small in size, easy to use with reliable operation offering affordable protection. With that combination of benefits, it’s no wonder the MicroClip series of personal gas detectors are the world’s most popular multi-gas detector.

Multi gas detector for H2S / CO / O2 / LEL with a battery run time of 18 hours in normal temperatures and IP68 water protection, delivering long runtime and reliability.

Featuring:

Small size
Easy to use
Reliable operation
Affordable protection
New IP Rating IP68

GASALERT MICROCLIP XL

PORTABLE / EASY TO USE / RELIABLE

CO | H2S | O2 | LEL

Small size

IP68 rating

Affordable protection

Part of Honeywell's MicroClip Gas Detector range

Featuring

2 year Oxygen sensor
Battery runtime of 18 hours in normal temperatures; cold weather guaranatee of at least 12 hour runtime for full warranty period
Continuous visual compliance with IntelliFlashTM
Multi-gas versatility with one-button simplicity
Compact & light weight design
Water Resistant
Bright wide-angled visual alarm bars
Standard datalogger
Concussion-proof boot
Continuous LCD shows simultaneous gas concentrations (H2S, CO, O2, CH4 & combustible)
Lithium polymer battery
Internal vibrating alarm
Four alarm levels
Fully compatible with Honeywell's MicroDock II automatic test & calibration station
Records TWA, STEL & maximum exposures to gas and displays reading on command
Full function self-test of sensor, battery, circuitry & audible/visual/vibration alarms
Full 2 year warranty including sensors

MicroCli XL Specifications

Size	11.3 x 6.0 x 3.2cm
Weight	179g
Temperature	-20 to +50°c
Humidity	0% - 95% RH [non-condensing]
Alarms	- visual, vibrating, audible [95dB] - Low, High, STEL, TWA, OL [over limit]
Test	Audible / Visual alarms on activation, sensors, battery and circuitry [continuous]
Pump	Compatible with sampler motorised sampling pump
Typical Battery Life*	18 hours [typical]; recharges in less than 6 hours
User Options	Confidence Beep Set STEL internal Sensor on/off Safe display mode Calibration lock O2 auto calibration gas level IntelliFlash interval Low alarm acknowledge User-settable calibration gas level Combustible gas measurement [%LEL or % by volume methane]
Ratings	EMI/RFI: complies with EMC directive 2004/108/EC IP66
Certificates & Approvals	Class 1, Div 1, Gr A, B, C, D Attex: CE Ex II 1 G Ex ia IIC T4 Ga IECEx: Ex ia IIC T4 Ga CE: European Conformity

*Approximately 20% capacity loss is normal with lithium polymer batteries after 500 charge cycles. Refer to the Operator's Manual for additional information

**Battery is guaranteed to have 12 hour runtime during warranty period under normal operating temperature -20 to 50°C

Accessories suited to the XL portable gas monitor

IR Connectivity Kit

The IR connectivity kit easily connects through the charging and IR communications port for data downloads and access to instrument set-up options.

{japopup type="image" content="images/Gas_Detection/Portable_Gas_Detection/Calibration-Docks/BW_MicroDock_II_MicroClip_series-400x400.jpg" width="400" height="400" title="GasAlert Extreme Accessories"} Honeywell BW MicroDock II Calibration Dock for the MicroClip series

{/japopup}

MicroDock II Base Station with Calibration Docking Module

The most cost effective way to manage the calibration and bump testing of BW's portable gas detectors is through the MicroDock II automated test and calibration system. Fully portable and easily expandable, the MicroDock II requires no computer and provides simultaneous management of up to six modules.

IntelliDoX Calibration Dock

The IntelliDoX system combines smart docking modules and device management software to provide automated instrument management for Honeywell Gas Detectors. [Replaces the MicroDock II by Honeywell] MicroClip Series gas detector compatible - helping you drive productivity, reliability and efficiency.