FREE CALL  1800 234 477     

RigRat Gas Area Monitor by Honeywell BW

Honeywell BW RigRatAVAILABLE SOON

Transportable Multi-gas Area Monitor

Protect your workers with the new BW RigRat, a user-friendly gas area monitor

The Honeywell BW™ RigRat is so easy to use that workers can operate it with confidence, trusting it to alert them to gas threats in their proximity - indoors and out, in temperatures from -40 to +60°C.

Up to six gas sensors. More than 15 sensors for toxic gases, O2, LEL, PID for VOC gases, infrafred sensors for highly flammable gases and verified 4R sensors for RAE products. 

Optional integated noise sensor and meterological sensor for tracking toxic plumes. 

Up to 8 weeks of runtime on a single charge. Longer runtime than any area monitor in its class. Built-in rechargeable Li-ion battery with charging time less than 18 hours.

Up to six slots for interchangeable gas sensors. Choice of electrochemical, PID, infrared, and catalytic bead sensors (measuring percent LEL and percent by volume).

Integrated Noise sensor and Metrological data sensors.

Enhanced configurations with programmable input and output.

Approval for explosive atmosphere. Certified for ATEX/IECEx Zone 0 and CSA C1D1.

Flexible applications. Zone declassification, turnarounds, confined space, routine maintenance, fence line and more. Available with pump for remote sampling.

One-button operation. Grab and go. No expertise required.

Simple setup with a smartphone. Easy mobile app for alarm set points, calibration records and more.

Added protection. Alerts workers to nearby gas leaks, whereas personal detectors cover only the breathing zone.

 

Sensor Range

H₂S / CO / O₂ / LEL / SO₂ / NH₃ / NO₂ / NO / HCN / CL₂ / VOC's / CO2

 

 

Features and Benefits

Rigrat Wireless Perimeter by HoneywellWireless Safety Perimeter - position several Honeywell BWTM RigRat monitors to form a wireless safety perimeter 

 

Honeywell Remote Monitoring RigratRemote Monitoring - Use with Honeywell's remote monitoring software to see gas readings, location and other data from any device with an internet connection - for fast, informed decisions. Add an optional noise sensor or meteorological sensor.

 

Honeywell BW Touchpoint & RigratHoneywell TouchpointTM Plus Compatible - Use with the Honeywell Touchpoint Plus controller for visibility on Honeywell BWTM RigRat monitors and workers' personal detectors.

 

Rigrat FeaturesOther Honeywell BWTM Rigrat Features - Line power for extended runtime in the field / I/O ports providing additional input capabilities and local executive activation / Inert mode that prevents alarm in normal ambient air / Large, easy-to-read display / Rugged, weatherproof design, with optional protective cage

 

 

BW RigRat Specifications & Technical Information

Size 40.0 x 29.0 x 47.0 cm
Weight 8 kg
Gas Sensor Slots  Up to 6
Gas Sampling Method Pumped or Diffusion
Battery Rechargeable Li-ion Battery (3.7V / 26.4 Ah)
Battery Charging Time Less than 18 hours when the instrument is powered off
Battery Running Time 8 weeks for low-powered model; other models vary by configuration
Keypads One-button operation and programming
Display 3.5" 240 x 320 TFT color LCD with white LED backlight
Alarm Red/yellow/ green LED alarm; buzzer alarm 108 dBA @1 m; on-screen indication of alarm conditions
Data Logging Complete gas sensors and instrument information for at least 4 months at one-minute intervals
Wireless
ISM license free band:
Bluetooth Low Energy Module (BT 4.2/5.0), 2.4 GHz in default;
Mesh Module: IEEE 802.15.4 868 MHz / 915MHz /2.4 GHz (optional); OR
Wi-Fi Module: 802.11 b/g/n 2.4 GHz (optional)
Radio Module & Range
Bluetooth Low Energy: RMBLEC, up to 16.4 ft. / 5 m;
Mesh: RM900A or RM2400, up to 984 ft. / 300 m;
Wi-Fi: RMWIFIC, up to 164 ft. / 50 m;
Outdoor Location GPS receiver module: GPS L1 frequency (1575.42 MHz) (optional)
IP Rating IP65 for pumped models; IP67 for diffusion models
Temperature
-20 to +60° C for pumped models
-40 to +60° C for diffusion models
Humidity 5 - 95% RH (non‑condensing)
Noise Sensor
70-110 dBA range; (respond: 100 Hz to 8 kHz), 1 dB resolution;
A-weighted 15 second equivalent level; updated every 5 seconds
Size 40.0 x 29.0 x 47.0 cm
Weight 8 kg
Gas Sensor Slots  Up to 6
Gas Sampling Method Pumped or Diffusion
Battery Rechargeable Li-ion Battery (3.7V / 26.4 Ah)
Battery Charging Time Less than 18 hours when the instrument is powered off
Battery Running Time 8 weeks for low-powered model; other models vary by configuration
Keypads One-button operation and programming
Display 3.5" 240 x 320 TFT color LCD with white LED backlight
Alarm Red/yellow/ green LED alarm; buzzer alarm 108 dBA @1 m; on-screen indication of alarm conditions
Data Logging Complete gas sensors and instrument information for at least 4 months at one-minute intervals
Wireless
ISM license free band:
Bluetooth Low Energy Module (BT 4.2/5.0), 2.4 GHz in default;
Mesh Module: IEEE 802.15.4 868 MHz / 915MHz /2.4 GHz (optional); OR
Wi-Fi Module: 802.11 b/g/n 2.4 GHz (optional)
Radio Module & Range
Bluetooth Low Energy: RMBLEC, up to 16.4 ft. / 5 m;
Mesh: RM900A or RM2400, up to 984 ft. / 300 m;
Wi-Fi: RMWIFIC, up to 164 ft. / 50 m;
Outdoor Location GPS receiver module: GPS L1 frequency (1575.42 MHz) (optional)
IP Rating IP65 for pumped models; IP67 for diffusion models
Temperature
-20 to +60° C for pumped models
-40 to +60° C for diffusion models
Humidity 5 - 95% RH (non‑condensing)
Safety Certifications (Pending)
cCSAus Class I Division 1; Group A, B, C, D; T4;
IEC EX/ATEX
I M1 Ex ia I Ma
II 1G Ex ia da IIC T4 Ga
For LELIR/CO2 sensor installed:
I M1 Ex ia I Ma
II 2G Ex ia da db IIC T4 Gb
1G Ex ia da IIC T4 Ga
Safety Certifications (Pending)
cCSAus Class I Division 1; Group A, B, C, D; T4;
IEC EX/ATEX
I M1 Ex ia I Ma
II 1G Ex ia da IIC T4 Ga
For LELIR/CO2 sensor installed:
I M1 Ex ia I Ma
II 2G Ex ia da db IIC T4 Gb
1G Ex ia da IIC T4 Ga
Wireless Approvals (Pending) FCC Part 15, IC, RE-D
ROHS (Pending) RoHS Compliant, Directive (EU) 2015/863
Safe Area Charge Port (AC CHG Safe Area) Battery charger input 6 VDC 3A typical; connect to AC/DC adaptor
Feild Charge (IS CHG Hazardous) Intrinsically safe line power supply input to extend instrument run time (low power model only)
Raemet Port (Serial) Port to RAEMet wind sensor (optional)
Analog/Switch Input Port (4-20 mA In) 4-20 mA signal input, X1 channel/switch on/off signal input, X1 channel (optional)
On/Off Switch Output (Switch) Max 20 V/ 120 mA, SPDT Normal Open, X3 channels for external ports (optional). Refer to the User Guide for complete details.

Download more information on technical and sensor specifications on the Honeywell BWTM Rigrat

 

DOWNLOAD PDF   the NEW RigRat Brochure 

 

DOWNLOAD PDF   the NEW RigRag Data Sheet

 

Download the Honeywell Device Configurator App for smartphones via the Google Play Store or the Apple Store.

 

Honeywell Device Configurator Download     IOS - Device Configurator Download

 

Line Marking Equipment Quote Request

Tell what you are interested in or your application and we will help with the best option for your needs.

  

Please select the required application and equipment interests

We can also have your line marker repaired. Call us today to organise your line marker repair.

Privacy Policy - your details are private and will not be sold/given to a third party.

Portable Gas Detector Warranty Registration

Warranty Registration - Gas Detection

Warranty Registration - Portable Gas Detector

Register your Portable Gas Detection

  
Privacy Policy - your details are private and will not be sold/given to a third party.
Privacy Policy - your details are private and will not be sold/given to a third party.

Book Your Loner Demo

Book your Lone Worker Device Demonstration

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Simply complete this form and one our qualified staff will contact you or phone the office on 1800 234 477.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Contact Us - Roof Safety Systems

Simply complete this form and one our qualified staff will contact you or phone the office on 1800 234 477.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Contact Us - Roof Safety Systems - Latchways

Please complete the details below and one of our Roof Safety Professionals will be in contact to discuss your system needs.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Simply complete this form and one our qualified staff will contact you or phone the office on 1800 234 477.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Request Your G7 Portable Gas Detector & Lone Worker Monitor Demo

  
Privacy Policy - your details are private and will not be sold/given to a third party.

6 Drawer Tool Box With BBS
7 Drawer Roll Cabinet With BBS
Vacuum Formed Insert Tray With Tools
45 Piece 1/4" & 3/8" Drive Socket Set
43 Piece 1/2" Drive Metric & AF Socket Set
Vacuum Formed Insert Tray With Tools
7 Piece Punch & Chisel Set
Vacuum Formed Insert Tray With Tools
54 Piece 10mm Shank Bit Set
Vacuum Formed Insert Tray With Tools
200mm Combination Pliers
200mm Long Nose Pliers
180mm Diagonal Cutting Pliers
Vacuum Formed Insert Tray With Tools
24 Piece Metric & AF Combination Spanner Set
Vacuum Formed Insert Tray With Tools
175mm Auto Loading Utility Knife
7 Piece Blade & Phillips Screwdriver Set
250mm Curved Jaw Multigrip Pliers
250mm Locking Pliers
450g (16oz) Ball Pein Hammer
250mm Adjustable Wrench
150mm Adjustable Wrench
30 Piece Hex Key Set
300mm Hacksaw

Privacy Policy - your details are private and will not be sold/given to a third party.
  

Please select the most appropriate time and contact method for one of our team to contact your regarding your query.

Privacy Policy - your details are private and will not be sold/given to a third party.
Privacy Policy - your details are private and will not be sold/given to a third party.