FREE CALL  1800 234 477     

Intech Process Indicators

 

IN-P

IN-P

Multifunction Indicator

LEARN MORE

IN-R

IN-R

Tachometer Indicator

LEARN MORE

IN-RT

IN-RT

Flow Rate Indicator

LEARN MORE

IN-RTB

IN-RTB

Flow Rate Indicator

LEARN MORE

IN-uP4

IN-uP4

Multifunction Indicator

LEARN MORE

uP4

uP4

Universal Input Indicator

LEARN MORE

LCI-LCD-5

LCI-LCD-5

Loop Powered Indicator

LEARN MORE

LCI-LCD-6

LCI-LCD-6

Loop Powered Indicator

LEARN MORE

 

Intech IN-P Multifunction Indicator

The IN-P Multifunction Indicator with relay output options, interfaces smoothly with a wide range of PLC and monitoring systems. It is a stand alone unit for single or multi point indication, alarm or control that will interface with a wide range of PLC's. Setup and calibration is simple, with on-screen, step-by-step instructions. The IN-P has a 6-digit LED display, 6 set-points and 5 front panel buttons for easy setup and operator interface. Up to 6 relay outputs, an analogue output and/or an RS485/RS232/Ethernet port can also be added.

Features: 

  • Simple setup and calibration.
  • On Screen Step by Step Instructions.
  • 5 Buttons for easy Operator Interface.
  • 6 Digit LED Display.
  • Option to add up to 6 Relay outputs.
  • Analogue Output Retransmission option.
  • Serial RS485/RS232 port option with Modbus RTU.
    Ethernet port option with Modbus TCP.
  • Wide Range of Power Supply options from 10V to 265V.
  • Multiple functions available for customising to your application.

Intech IN-R Tachometer Indicator

The IN-R is a technically advanced but cost effective microprocessor-based indicator designed specifically for use in tachometer applications. Options for up to four relay outputs make it ideal for stand-alone control or as a PLC interface. Intuitive scrolling text menus, (activated from the front panel), guide you step by step through the setup and calibration process, and the large 4-digit display ensures that the figures can be easily read from a distance.

Features:

  • Large 4 Digit LED Display.
  • Microprocessor Based for Wide Range Calibration.
  • Inputs: 0~30V, magnetic pickup, NPN, PNP, TTL, Namur.
  • 4 Set Points with delay.
  • 4 LED’s for Alarm indication.
  • Analogue Output Retransmission option.
  • Simple setup and calibration.
  • On Screen Step by Step Instructions.
  • 5 Buttons for easy Operator Interface.
  • Wide Range of Power Supply options from 10V to 265V.
  • Excitation supply 24Vdc.

Intech IN-RT Flow Rate Indicator

The IN-RT indicator is the ideal solution for a variety of flow rate application requirements. This indicator, with four relay outputs, has been designed for ease of use; with intuitive, scrolling text prompts that guide you step-by-step through the setup process. The front panel includes a 6-digit LED display and five front-panel buttons, for simple operator interface. Up to four relay outputs, an analogue output and/or an RS485/RS232 serial port can also be added.

Features:

  • 6 Digit LED Display.
  • Inputs: 0~30V, magnetic pickup, NPN, PNP, TTL, Namur.
  • 4 Set Points with delay.
  • Analogue Output Retransmission option.
  • Serial RS485/RS232 port option with Modbus RTU.
  • Simple setup and calibration.
  • On Screen Step by Step Instructions.
  • 5 Buttons for easy Operator Interface.
  • Wide Range of Power Supply options from 10V to 265V.
  • Excitation supply 24Vdc.

Intech IN-RTB Flow Rate Indicator

The IN-RTB controller is the ideal solution for a variety of flow rate and batching applications. This controller, with four relay outputs, has been designed for ease of use, with intuitive, scrolling text prompts that guide you step-by-step through the setup process. The front panel includes two rows of 6-digits and five front-panel buttons, for simple operator interface. The dual display allows you to view total and flow rate simultaneously. Up to four relay outputs, an analogue output and/or an RS485/RS232 serial port can also be added.

Features:

  • Dual 6 Digit LED Displays.
  • View Flow Rate & Total simultaneously.
  • Inputs: 0~30V, magnetic pickup, NPN, PNP, TTL, Namur.
  • 5 Set Points annunciator LED’s.
  • Analogue Output Retransmission option.
  • Serial RS485/RS232 port option with Modbus RTU.
  • Simple setup and calibration.
  • On Screen Step by Step Instructions.
  • 5 Buttons for easy Operator Interface.
  • Wide Range Power Supply options from 10V to 265V.
  • Excitation supply 24Vdc.

Intech IN-uP4 Universal Input Indicator

The IN-uP4 is a universal single input indicator, which makes interface with a wide range of sensors easy. The IN-uP4 has a 4-digit LED display. An option to add two relay outputs (with two setpoint indicator LED’s), and one 4~20mA analogue output is available. The indicator (Rev 1) has a Universal Power Supply of 24~250Vac / 19.5~250Vdc. Setup and calibration is simple, using ‘uP Configure’ software, with step-by-step instructions.

Features:

  • Universal Input with Indication.
  • Panel Mount.
  • Programmable via USB Port using uP Configure software and XU-USB (Rev 1) key.
  • Simple setup and calibration.
  • 4-digit LED Display.
  • Option to add Two Relay Outputs (with two setpoint indicator LED’s), and One 4~20mA Analogue Output.
  • Universal Power Supply of 24~250Vac / 19.5~250Vdc.
  • Sensor Power Supply for powering external Transmitter.
  • Dimensions: H=48mm, W=95mm, D=84mm.
  • IP65.
  • Low Cost.

Intech uP4 Universal Input Indicator

The uP4-Din is a DIN rail mount, universal single input indicator, which gives easy interface with a wide range of sensors. It is also fitted with two relay outputs (with two setpoint indicator LEDs), and one optional retransmission analogue output (4~20mA or 0~10Vdc selectable). The uP4-Din has a 4-digit LED front display, and a universal power supply of 24~250Vac / 19.5~250Vdc. Setup and calibration is simple, using ‘uP Configure’ software (version 1.5.23 or later), with step-by-step instructions.

Features:

  • Universal Input with Indication.
  • DIN Rail Mount.
  • Universal AC or DC supply 24~250Vac / 19.5~250Vdc.
  • Two Relay Outputs (with Setpoint LEDs).
  • Option to add One Retrans Analogue Output (4~20mA or 0~10Vdc selectable).
  • Programmable via USB Port using uP Configure Programming Software (version 1.5.23 or later) and the XU-USB (Rev 1) key.
  • Simple setup and calibration.
  • 4-digit LED display with Transparent Cover.
  • Sensor power supply for powering external transmitter.
  • Dimensions

Intech LPI-LCD-5 Loop Powered Indicator

The LPI-LCD-5 is a compact 5 digit display indicator. It has effortless front-panel programming and simple, step-by-step calibration procedures (Requires 4~20mA Calibrator), high resolution (50,000 count) and is easily software scalable to any engineering unit of measurement. It is suited for mounting in confined spaces with it's short-depth case.

Intech LPI-LCD-6 4~6mA Panel Display

The LPI-LCD-6 is ideal for displaying a variety of process variables, it is easy to scael to your required engineering units.

Features:

  • Easy installation (front mounting unit takes up virtually no space behind the panel).
  • Loop powered display backlight.
  • Protection against reverse wiring and accidental 24V supply.
  • Easy calibration via on-screen menu. 4~20mA Calibrator is NOT required!

Line Marking Equipment Quote Request

Tell what you are interested in or your application and we will help with the best option for your needs.

  

Please select the required application and equipment interests

We can also have your line marker repaired. Call us today to organise your line marker repair.

Privacy Policy - your details are private and will not be sold/given to a third party.

Portable Gas Detector Warranty Registration

Warranty Registration - Gas Detection

Warranty Registration - Portable Gas Detector

Register your Portable Gas Detection

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Warranty Registration - Sentech Refrigerant Monitor

To validate the Warranty on your Sentech Refrigerant Monitor please complete this form and submit to return it to Aegis Sales & Service / Techinspect within 30 days of installation.

Please provide the relevant system information: Installation Address, Company Name and/or Building Name, Sentech Model and Serial Number.

  
  

Please provide required information on the installation of the system.

  
  

I hereby certify that the above SenTech equipment has been installed and inspected in accordance with the installation and operation manual and is in satisfactory operating condition.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Book Your Loner Demo

Book your Lone Worker Device Demonstration

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Simply complete this form and one our qualified staff will contact you or phone the office on 1800 234 477.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Contact Us - Roof Safety Systems

Simply complete this form and one our qualified staff will contact you or phone the office on 1800 234 477.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Contact Us - Roof Safety Systems - Latchways

Please complete the details below and one of our Roof Safety Professionals will be in contact to discuss your system needs.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Simply complete this form and one our qualified staff will contact you or phone the office on 1800 234 477.

  
Privacy Policy - your details are private and will not be sold/given to a third party.

Request Your G7 Portable Gas Detector & Lone Worker Monitor Demo

  
Privacy Policy - your details are private and will not be sold/given to a third party.

6 Drawer Tool Box With BBS
7 Drawer Roll Cabinet With BBS
Vacuum Formed Insert Tray With Tools
45 Piece 1/4" & 3/8" Drive Socket Set
43 Piece 1/2" Drive Metric & AF Socket Set
Vacuum Formed Insert Tray With Tools
7 Piece Punch & Chisel Set
Vacuum Formed Insert Tray With Tools
54 Piece 10mm Shank Bit Set
Vacuum Formed Insert Tray With Tools
200mm Combination Pliers
200mm Long Nose Pliers
180mm Diagonal Cutting Pliers
Vacuum Formed Insert Tray With Tools
24 Piece Metric & AF Combination Spanner Set
Vacuum Formed Insert Tray With Tools
175mm Auto Loading Utility Knife
7 Piece Blade & Phillips Screwdriver Set
250mm Curved Jaw Multigrip Pliers
250mm Locking Pliers
450g (16oz) Ball Pein Hammer
250mm Adjustable Wrench
150mm Adjustable Wrench
30 Piece Hex Key Set
300mm Hacksaw

Privacy Policy - your details are private and will not be sold/given to a third party.
  

Please select the most appropriate time and contact method for one of our team to contact your regarding your query.

Privacy Policy - your details are private and will not be sold/given to a third party.
Privacy Policy - your details are private and will not be sold/given to a third party.