 |
The LPI-LCD-6 - 4~20mA Panel Display is ideal for displaying a variety of process variables, and is easy to scale to your required engineering units. |
{2jtoolbox_content tabs id:6 begin title: Features}
- Easy installation (front mounting unit takes up virtually no space behind the panel).
- Loop powered display backlight.
- Protection against reverse wiring and accidental 24V supply.
- Easy calibration via on-screen menu.
{2jtoolbox_content tabs id:6 title: Ordering Information}
| LPI-LCD-6 | One 4~20mA Loop Powered Input Panel Mount Display. |
{2jtoolbox_content tabs id:6 title: Specifications}
| Input configuration: | 4~20mA Loop Powered. | ||
| Minimum Input: | 3.5mA. | ||
| Maximum Input: | 100mA. | ||
| Load: | 220Ω Typical. | ||
| Full scale range: | Adjustable Between -99,999 and +999,999. | ||
| Max Resolution: | 50,000 Counts. | ||
| A/D Conversion: | 16bit Sigma Delta. | ||
| Accuracy: | ±0.02%. | ||
| Temperature Coefficient: | 30ppm/°C Typical. | ||
| Conversion Rate: | 10 Readings per Second. | ||
| Protection: | Reverse Polarity. Accidental 24V Supply. | ||
| Display: | Liquid crystal display (LCD) 17.5mm. | ||
| Units: | Standard KG, LB, T, or Custom. | ||
| Decimal point: | Up to 4 Decimal Places. | ||
| ±Over-Range: | Shows ‘UNDER’ or ‘OVER’. | ||
| Operating temperature: | -10°C to +60°C. | ||
| Relative humidity: | 10~85%RH (non-condensing). | ||
| Power Supply: | Designed to be powered from the 4~20mA current loop input signal. | ||
| Display: | 17.5mm LCD. | ||
| Units: | Standard KG, LB, T or Custom. | ||
| Decimal: | Up to 4 Decimal Places. | ||
| ±Over-Range: | Shows 'UNDER' or 'OVER'. | ||
| Housing: | Rating IP65. | ||
| Case dimensions: | 144 x 72 x 25mm (WxHxD). | ||
{2jtoolbox_content tabs id:6 end}
Manufacturer: Intech Instruments Ltd
